Our text describes a trade-off that we must make as engineers between our confidence in the value of a parameter versus the precision with which we know the value of that parameter. That trade-off might be affected by whether we are looking at a two-sided or bounded (one-sided) interval.

Question: Discuss your interpretation of the confidence-precision trade-off, and provide a few examples of how you might make a choice in one direction or the other in an engineering situation.

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10