Engineering, 11.03.2020 05:11 littlemisschris

A level loop began and closed on BM_A (elevation = 823.368 ft). The plus and minus sights were kept approximately equal. Readings (in feet) listed in the order taken are: 4.388 (BS) on BM_A, 4.538 (FS) and 6.907 (BS) on TP1, 8.8 (FS) and 4.68 (BS) on TP2, 5.978 (FS) and 3.73 (BS) on TP3, 5.245 (FS) and 8.464 (BS) on TP4, and 3.598 (FS) on BM_A.

Distances are: BM_A to TP1 = 375 ft, TP1 to TP2 = 212 ft, TP2 to TP3 = 402 ft, TP3 to TP4 = 257 ft, TP4 to BM_A = 254 ft.

The final (adjusted) height of TP2 is?

What is the observed height difference between TP2 and TP3 ?

The misclosure is?

The number of setups (n) is?

What is the provisional Height of TP3?

The precision (m) for the leveling run is equal to (rounded to nearest integer)

The correction for each set-up is?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

You know the right answer?

A level loop began and closed on BM_A (elevation = 823.368 ft). The plus and minus sights were kept...

Questions