Engineering, 11.03.2020 23:02 nommies005
KVL holds for the supermesh, so we can write a KVL equation to generate the second equation we need to solve for the two unknown mesh currents, ixix and iyiy. Write the KVL equation for the supermesh by summing the voltages around the supermesh in the direction of the mesh currents and setting the sum to zero.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
KVL holds for the supermesh, so we can write a KVL equation to generate the second equation we need...
Mathematics, 26.03.2021 06:10
Mathematics, 26.03.2021 06:10
Mathematics, 26.03.2021 06:10
Mathematics, 26.03.2021 06:10
Chemistry, 26.03.2021 06:10
History, 26.03.2021 06:10