An experimental study was made for flow over NACA 0012 airfoil profile wing by running low-speed wind tunnel at 200rpm in our low-speed lab. Experiments were made for angle of attacks of 0 + 0.5, 2+ 0.5, 5+ 0.5 and 8+ 0.5 degrees for the same rpm setting. Data was collected and recorded at a certain frequency using the tunnel data acquisition system. You can find the data on canvas under the homework module. a) Calculate free stream velocity using the pitot-static probe and compare with the tunnel measurement which was on the data file. Compare uncertainties for both measurements and comment on it.

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure