Engineering, 12.03.2020 18:58 whitefang3153
The pump of a water distribution system is powered by a 15-kW electric motor whose efficiency is 90 percent. The water flow rate through the pump is 50 L/s. The diameters of the inlet and outlet pipes are the same, and the elevation difference across the pump is negligible. If the pressures at the inlet and outlet of the pump are measured to be 100 kPa and 300 kPa (absolute), respectively, determine the mechanical efficiency of the pump.
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
The pump of a water distribution system is powered by a 15-kW electric motor whose efficiency is 90...
Mathematics, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
History, 23.04.2021 18:50
Computers and Technology, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
English, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
English, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
Mathematics, 23.04.2021 18:50
Computers and Technology, 23.04.2021 18:50