Engineering, 13.03.2020 00:55 RockieLuv7292

A stretch of 1 km new concrete pavement is being laid in a 100 mm thick layer. The ambient temperature when laying the concrete is 20°C, and you can assume that the concrete does not have any internal stress at this temperature. The thermal expansion coefficient of concrete is 10μm/m°C, and its elastic modulus is 20 GPa. Suppose all deformation of the concrete is restrained (the concrete cannot move), and suppose that the concrete behaves as a linear elastic material. Knowing its tensile strength is 10 MPa, at what temperature does this concrete crack? (10 pts)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.

Answers: 3

Answer

Engineering, 06.07.2019 02:30

A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush

Answers: 3

Answer

Engineering, 06.07.2019 04:20

In modern manufacturing, which types of metal chips would be undesirable and why ? ?

Answers: 3

Answer

You know the right answer?

A stretch of 1 km new concrete pavement is being laid in a 100 mm thick layer. The ambient temperatu...

Questions