Engineering, 13.03.2020 05:56 keirarae2005

The crates A and B of mass mA = 50 kg and mB = 90 kg, respectively, are connected by a pulley system. The system is released from rest on the inclined surfaces for which θ = 30°. Friction between A and the inclined surface on which it slides is insufficient to prevent slipping, and friction between B and the incline on which it slides is negligible. The cables in the pulley system are inextensible, and the coefficient of kinetic friction between crate A and the horizontal surface is μk.

Required:
Letting μk=0 determine the speed of B after A slides 5 m up the incline.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Answers: 3

Answer

You know the right answer?

The crates A and B of mass mA = 50 kg and mB = 90 kg, respectively, are connected by a pulley system...

Questions