Engineering, 13.03.2020 06:01 chumreaper2002

. Consider IREF = 0.25 mA. What is the range of output voltage for which the circuit operates as a small-signal amplifier? (Hint: What should be the region of operation for both devices?)B. If we wish to increase the value of IREF, this can be done by RREF and by R2. C. If IREF is made a factor of 4 greater, by what factor will gm1 change? Justify your answer with a supporting equation. D. If IREF is made a factor of 4 greater, by what factor will the amplifier circuit’s output resistance, Routchange? Justify your answer with a supporting equation. E. If IREF is made a factor of 4 greater, by what factor will the amplifier circuit’s voltage gain, vo/vichange? Justify your answer with a supporting equat

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

Engineering, 04.07.2019 19:10

What is the main objective of using reheat rankine cycle?

Answers: 3

Answer

You know the right answer?

. Consider IREF = 0.25 mA. What is the range of output voltage for which the circuit operates as a s...

Questions