Engineering, 16.03.2020 17:02 manuell090203
Two Carnot engines operate in series such that the heat rejected from one is the heat input to the other. The heat transfer from the high-temperature reservoir is 500 kJ. The overall temperature limits are 1000K and 400K. Both engines produce equal work. What is most nearly the intermediate temperature between the two engines?
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
Engineering, 06.07.2019 04:20
Steam in a heating system flows through tubes whose outer radius is 2.5 cm and whose walls are maintained at a temperature of 180 °c . circular aluminum alloy 2024-t6 fins ( k= 186 wm. k) of outer radius 3 cm and constant thickness 1 mm are attached to the tube. the space between the fins is 3 mm and thus there are 250 fins per meter of tube length. heat is transferred to the surrounding air at too-25 °c, with a heat transfer coefficient of 40 w/m2. k. manufacturer a claims that this system is rated at 3.5 kw per meter of tube length. if the fins are an integral part of the steam tube, find the heat transfer rate in kw for a 1-m length of tube. is manufacturer a's claim valid? compare the heat transfer rate from 1 meter of tube length if there are no fins.
Answers: 3
Two Carnot engines operate in series such that the heat rejected from one is the heat input to the o...
English, 04.01.2021 22:00
English, 04.01.2021 22:00
Mathematics, 04.01.2021 22:00
Chemistry, 04.01.2021 22:00
Mathematics, 04.01.2021 22:00
Chemistry, 04.01.2021 22:00
History, 04.01.2021 22:00
English, 04.01.2021 22:00
Mathematics, 04.01.2021 22:00
English, 04.01.2021 22:00
Mathematics, 04.01.2021 22:00