Engineering, 16.03.2020 18:30 raven76
Create a chart comparing the most common metal types that we utilize in metal fabrication Explain the pros and cons of each as
applied in the shop. You should include the cost availability, usability and give an example of when each should be used.
Metal Types
- Iron
Steel
-Carbon Steel
- Stainless Steel
- Copper
- Bronze
Brass
- Aluminum
- Magnesium
Answers: 1
Engineering, 03.07.2019 14:10
Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.
Answers: 3
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Create a chart comparing the most common metal types that we utilize in metal fabrication Explain th...
Mathematics, 18.10.2021 21:10
Mathematics, 18.10.2021 21:10
Social Studies, 18.10.2021 21:10
Mathematics, 18.10.2021 21:10
Mathematics, 18.10.2021 21:20
English, 18.10.2021 21:20
History, 18.10.2021 21:20
Mathematics, 18.10.2021 21:20
Mathematics, 18.10.2021 21:20
Social Studies, 18.10.2021 21:20
Computers and Technology, 18.10.2021 21:20