Engineering, 17.03.2020 04:37 jmanrules200
A round bar of length l=115 mm, diameter d=16 mm, is subjected to axial force P=4000 N, transverse force F=550 N, and torque T=25 N m. The material is steel with Sy=280 MPa. Using distortion energy (von Mises) yield criterion, calculate: ∙ The safety factor at point A. ∙ The safety factor at point B. Answer tolerance = 2%. Be sure to include units and the correct sign with your answers. Hint: Do not neglect shear stress due to bending.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A round bar of length l=115 mm, diameter d=16 mm, is subjected to axial force P=4000 N, transverse f...
Questions
Biology, 21.11.2020 04:20
English, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
Mathematics, 21.11.2020 04:20
