A. braking for the motor.
Engineering, 18.03.2020 00:04 XxpinkgothicxX
2. An inductor can be placed in series with a motor to provide
A. braking for the motor.
B. heat reduction in the motor windings.
C. less current feedback to the driver.
D. faster motor response to driver signals.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t
Answers: 3
You know the right answer?
2. An inductor can be placed in series with a motor to provide
A. braking for the motor.
A. braking for the motor.
Questions
English, 04.11.2021 14:00
Mathematics, 04.11.2021 14:00
Mathematics, 04.11.2021 14:00
Mathematics, 04.11.2021 14:00
Mathematics, 04.11.2021 14:00
English, 04.11.2021 14:00
English, 04.11.2021 14:00
Computers and Technology, 04.11.2021 14:00
Mathematics, 04.11.2021 14:00
Health, 04.11.2021 14:00
