Engineering, 19.03.2020 18:43 vanessa674
A large flat plate is subjected to constant-amplitude uniaxial cyclic tensile stresses of a maximum stress of 123 and a minimum stress of 29 MPa. If before testing the largest surface crack is 0.77 mm and the plain-strain fracture toughness of the plate is 31.2 MPa m1/2, estimate the fatigue life of the plate in cycles to failure. For the plate, m
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
You know the right answer?
A large flat plate is subjected to constant-amplitude uniaxial cyclic tensile stresses of a maximum...
Questions
Mathematics, 09.12.2021 02:50
Mathematics, 09.12.2021 02:50
Chemistry, 09.12.2021 02:50
Health, 09.12.2021 02:50
SAT, 09.12.2021 02:50
Mathematics, 09.12.2021 02:50
SAT, 09.12.2021 02:50
Mathematics, 09.12.2021 02:50
Mathematics, 09.12.2021 02:50
