Use the following assumptions for problems 1 and 2:
1. Brick are 7 12" long x 2 VA"tall...
Engineering, 19.03.2020 21:17 Asrys
Use the following assumptions for problems 1 and 2:
1. Brick are 7 12" long x 2 VA"tall, mortar joints are 3/8" thick.
2. Standard concrete block is 75/8" X 15 5/8".
3. One bag masonry cement per 125 brick or 45 block.
4. Five percent for waste.
5. Assume a bearing of 4" on each end of the steel lintel.
6. The wall is 120' long, 8' tall with 2 - 3X3' windows and 1-3' x 7' door.
7. The coefficient of thermal expansion of brick: 0.0000036 in/in/°F.
8. The temperature swing is 120°F. 9. Maximum vertical expansion joint width 12" with a sealant movement capacity of 25%. (Each joint can only move 1/8" which is 12" x 25 = 1/8")
a. Calculate the number of brick in the wall.
b. Number of bags of mortar.
c. Number of courses of brick.
d. Number and size of the steel angle lintels above the windows and door.
e. Calculate the number of block in the wall.
f. Number of bags of mortar.
g. Number of courses of block.
Answers: 2
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
English, 05.07.2019 10:00
Computers and Technology, 05.07.2019 10:00
History, 05.07.2019 10:00
Social Studies, 05.07.2019 10:00
French, 05.07.2019 10:00
Social Studies, 05.07.2019 10:00
History, 05.07.2019 10:00
Advanced Placement (AP), 05.07.2019 10:00
History, 05.07.2019 10:00
Chemistry, 05.07.2019 10:00
History, 05.07.2019 10:00
Biology, 05.07.2019 10:00