Engineering, 20.03.2020 12:01 dayanara72
Steam at 0.6 MPa and 300oC steadily enters a nozzle whose inlet area is 0.07 m2. The velocity of the steam at the inlet is 5 m/s. Steam leaves the nozzle at 250oC and 0.2 MPa. Heat losses from the nozzle are estimated to be 20 kW. Find (a) the velocity at the nozzle exit, and (b) the volume flow rate at the nozzle exit
Answers: 1
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 19:10
What is a monomer? how do they form a ploymer from the view point of chemical bonding?
Answers: 1
Steam at 0.6 MPa and 300oC steadily enters a nozzle whose inlet area is 0.07 m2. The velocity of the...
English, 11.11.2021 03:10
Mathematics, 11.11.2021 03:10
Chemistry, 11.11.2021 03:10
Medicine, 11.11.2021 03:10
Mathematics, 11.11.2021 03:10
History, 11.11.2021 03:10
Physics, 11.11.2021 03:10
Arts, 11.11.2021 03:10
English, 11.11.2021 03:10
Chemistry, 11.11.2021 03:10