Engineering, 21.03.2020 04:01 asiamuhammad6
The following test data were gathered to design a settling tank. The initial turbidity for the test was 33.0 NTU.
Determine the detention time and overflow rate that will yield 88% removal of suspended solids. The data given are suspended solids concentrations in NTU.
Time, min
Depth,ᵃ m 30 60 90 120
1.0 5.6 2.0
2.0 11.2 5.9 2.6
3.5 14.5 9.9 6.6 3.0
"Depths from top of column, colunul depth =4.0 m.
Answers: 1
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
The following test data were gathered to design a settling tank. The initial turbidity for the test...
Mathematics, 03.03.2021 04:30
Mathematics, 03.03.2021 04:30
Geography, 03.03.2021 04:30
Geography, 03.03.2021 04:30
Mathematics, 03.03.2021 04:30
Mathematics, 03.03.2021 04:30
History, 03.03.2021 04:30
Mathematics, 03.03.2021 04:30
Chemistry, 03.03.2021 04:30