Engineering, 22.03.2020 19:31 tornadowolfcosplay

Which statement best describes how a hearing aid works?

A microphone receives the sound, translates it to electronic signals, strengthens them, and sends them to the individual via the ear.
A microphone bypasses the interpretation of sound and instead relays the vibrations directly to the individual.
An implant bypasses parts of the cochlea and sends messages to the brain, where they are then recognized as sound.
An implant receives the sound and then softens it before translating into vibrations, which are then communicated to the individual.

Answers: 1

Show answers

Another question on Engineering

Engineering, 06.07.2019 04:10

Consider a power plant with water as the working fluid that operates on an ideal rankine cycle. it has a net power output of 45mw. superheated steam enters the turbine at 7mpa and 500°c (h=3411.4 kj/kg; s=6.8 kj/kg k) and is cooled in the condenser at a pressure of 10 kpa by running cooling water from a lake through the tubes of the condenser at a rate of 2000 kg/s. (a) show the cycle on a t-s diagram (a right schematic is fine - you do not need to calculate the temperatures at each point); (b)-determine the work done by the turbine and the pump in kj/kg; (c)-the mass flow rate of water used by the power plant; (d)-the thermal efficiency of the cycle; (e)-the temperature rise of the cooling water. assume the cooling water is incompressible with cp 4.18 kj/kg°c.

Answers: 3

Answer

Engineering, 06.07.2019 04:10

Agas mixture with a compostion of 55 methane, 30% propane, and 15 butane by volume) is compressed from 1 bar and 25°c to 9bar in a compressor with an isentropic efficiency of 85%. the environment has a temperature of to25 c. determine (a) the exit temperature of the mixture (b) the specific work required to run the compressor (c) the specific entropy generation of the process (d) the specific exergy destruction of the process (e) the second law efficiency of the compressor

Answers: 3

Answer

Engineering, 06.07.2019 04:30

What does stp and ntp stands for in temperature measurement?

Answers: 3

Answer

Engineering, 06.07.2019 05:10

An ideal vapour-compression heat pump cycle provides a heating rate of 12btu/s. the working fluid, refrigerant 134a, enters the compressor as a saturated vapor at 40 psi and exits the condenser as a saturated liquid at 160 psi. determine (a) the mass flow rate of the working fluid in lb/min (b) the compressor power in btu/min. (c) the coefficient of performance.

Answers: 2

Answer

You know the right answer?

Which statement best describes how a hearing aid works?

A microphone receives the sound,...

Questions