Engineering, 23.03.2020 22:59 jaygamer37

Liquid nitrogen for cooling the high-purity germanium detectors, maintained at a temperature of 78 K, is stored in a dewar made from two concentric cylinders. The area between the cylinders is evacuated, so no conduction or convection can occur. The inner cylinder has an outside diameter of 0.6 m and an outside height of 1.5 m. There is a 0.1 m gap between the inside and outside cylinders. The surfaces of both cylinders are gray, with emissivity of 0.2. The outer surface of the outer cylinder has emissivity of 0.8 and loses heat by radiation to surroundings at 300 K.

Find the total heat rate into the liquid nitrogen.

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

You know the right answer?

Liquid nitrogen for cooling the high-purity germanium detectors, maintained at a temperature of 78 K...

Questions