Engineering, 24.03.2020 18:57 quinteroalex2001

Analyze the following ideal transistor circuit. Can use general rule of thumbs for analyzing transistors b-base, c- collector, and e-emitter ports (i. e., Vbe = 0.6V, Vce = 0.2V, Gain = Ic/Ib = 10:1, etc.). Show your work. a) When Vin = 0V, what is the voltage at Vout? b) When Vin = 5V, what is the voltage at Vout? c) When Vin = 0V, what is the voltage at the base of the transistor? d) When Vin = 5V, what is the voltage at the base of the transistor?

Answers: 2

Show answers

Answers

Answer from: fortforeman5

a) Vout= 5V

b) Vout= 5V

c) Vbase= 0.6V

d) Vbase= 0.6V

Explanation:

Consider the circuit shown in attachment

a) When Vin is 0V, the base circuit is not turned, so

Ib=0 and Ic=∞ as transistor is not turned on so

Vout =5V

b) When Vin= 5 V,

Ib= (Vin-Vb)/Rb

Ib=(5-0.6)/1000= 0.0044A

Ic= 0.0044×10=0.044A

Vout= 5- 0.044×1000= not real value

Vout= Vce= 5V

c) voltage drop across Vbase= 0.6V

d) Vbase= 0.6V

In all the above cases, the transistor will not be turned on biasing base voltage and resistor values are very high compared to VCC which is 5V in the given circuit

Analyze the following ideal transistor circuit. Can use general rule of thumbs for analyzing transis

Answer from: nathanbrockdac

(a) Vout = Vce = 5V (cut-off)

(b) Vout = 0V (saturation)

(d) Vb = 4.4V

Explanation:

This transistor circuit depicts a common emitter configuration

Firstly we have to take note of the formulas used in a common - emitter configuration

Vce = Vcc - Ic× RLwhen Ib =0, Ic= 0Vce = VccTaking the emitter -base circuit , we have that Ib = $\frac{V_{in}- V_{BE} }{R_{B} }$ $\frac{V_{in}- V_{BE} }{R_{B} }$

(a) when Vin = 0V, the transistor is said to be in cut-off because it does not conduct any current , In cut-off both the base- emitter and the base- collector junctions are reverse-biased.

Vce = Vcc - Ic× RL

when Ib =0, Ic= 0

Vce = Vcc

Vout = 5V

(b) Ib =

$\frac{V_{in}- V_{BE} }{R_{B} }$ ; therefore $I_{B} = \frac{5- 0.6}{1000}$

Ib = 4.4mA

Ic = β ×Ib ; this relationship does not hold good when the transistor is in saturation

therefore we have to find the value of Ic at saturation (when the transistor is on)

Ic (sat) = Vcc / RL

= 5/ 1000

= 5mA

= 10 × 4.4× 10⁻³

Ic= 0.044A; this value is too large as Ic cannot increase more than the saturation value

Vce = Vcc - Ic× RL

= 5 - 5 ×10⁻³× 1000

= 5 - 5

Vce= 0V; Vout = 0V

the base emitter voltage Vbe = 0.6V , whereas a PNP has a Vbe = -0.6V

Vbe = Vb - Ve

Vin = Ib ×Rb + Vbe ; Ib× Rb = Vb (voltage at the base )

therefore Vin = Vb + Vbe

making Vb as the subject of formulae

Vb = Vin - Vbe

Vb = 0- 0.6 = - 0.6V

(d) when Vin = 5V

Vb = Vin - Vbe

= 5 - 0.6

Vb = 4.4V

Answer from: Quest

unlike the threaded fasteners which are used to clamp the machine members, power screws are used to transmit power. common applications of power screws are: screw jacks: to lift weight. lead screw of lathe: for axial movement of tool and its precise positioning.

Answer from: Quest

answer:

explanation:

Another question on Engineering

Engineering, 04.07.2019 18:10

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.

Answers: 3

Answer

You know the right answer?

Analyze the following ideal transistor circuit. Can use general rule of thumbs for analyzing transis...

Questions