Engineering, 24.03.2020 23:31 mtropical6753

A 21-tooth pinion rotating at 1800 rpm meshes with a 33-tooth gear in a simple spur gear set. Both pinion and gear are manufactured to a quality level of 9. A reliability of 0.9 has been specified, and the transmitted tangential load is 2800 lb. Conditions are such that Km = 1.7. It is proposed that standard 25-degree, full-depth teeth be used, with both pinion and gear hobbed from an AISI 4140 nitride steel. The diametral pitch is 6, and the face width 2.000 in.
(a) Determine the bending stress using the AGMA equations (for the gear most likely to fail).
(b) In the gearset, which do you expect to fail first - the pinion or the gear?
(c) Determine the pitch diameter of the pinion and pitch-line velocity of the gearset.
(d) Determine the dynamic factor K_v.
(e) Determine the bending geometry factor (J) and application factor.
(f) Determine the size factor (K_s), rim thickness factor (K_B), and idler factor (K_1).
(g) Determine the pinion-tooth bending stress How would you determine the factor of safety? Describe qualitatively.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

You know the right answer?

A 21-tooth pinion rotating at 1800 rpm meshes with a 33-tooth gear in a simple spur gear set. Both p...

Questions