Engineering, 25.03.2020 20:26 xjdjsisi
The yield strength for an alloy that has an average grain diameter of 5.3 x 10-2 mm is 121 MPa. At a grain diameter of 8.0 x 10-3 mm, the yield strength increases to 233 MPa. At what grain diameter, in mm, will the yield strength be 209 MPa?
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
Engineering, 04.07.2019 19:20
Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3
Answers: 2
You know the right answer?
The yield strength for an alloy that has an average grain diameter of 5.3 x 10-2 mm is 121 MPa. At a...
Questions
Mathematics, 21.10.2019 19:30
Mathematics, 21.10.2019 19:30
Mathematics, 21.10.2019 19:30
Computers and Technology, 21.10.2019 19:40
Social Studies, 21.10.2019 19:40
Social Studies, 21.10.2019 19:40
Mathematics, 21.10.2019 19:40
