A 2.0 m wide continuous foundation is placed at 1.5 m depth in a saturated clay where cu 40 kN/m2 and y 18.5 kN/m2. At 2.0 m below the ground level, this clay layer is underlain by a stiffer clay where c-60 kN/m2 and y 19.0 kN/m3 What would be the maximum wall load allowed with FS 3?

Liquid flows at steady state at a rate of 2 lb/'s through a pump, which operates to raise the elevation of the liquid 100 ft from control volume inlet to exit. the liquid specific enthalpy at the inlet is 40.09 btu/lb and at the exit is 40.94 btub. the pump requires 3 btu/s of power to operate. if kinetic energy effects are negligible and gravitational acceleration is 32.174 tt/s, the heat transfer rate associated with this steady state process is most closely 1)-2,02 btu/s from the liquid to the surroundings 2)-3.98 btu/s from the surroundings to the liquid. 3)-4.96 btu/s from the surroundings to the liquid. 4)-1.04 btu/s from the liquid to the surroundings.