subject
Engineering, 26.03.2020 17:48 nefertitihorne12

Liquid nitrogen for cooling the high-purity germanium detectors, maintained at a temperature of 78 K, is stored in a dewar made from two concentric cylinders. The area between the cylinders is evacuated, so no conduction or convection can occur. The inner cylinder has an outside diameter of 0.6 m and an outside height of 1.5 m. There is a 0.1 m gap between the inside and outside cylinders. The surfaces of both cylinders are gray, with emissivity of 0.2. The outer surface of the outer cylinder has emissivity of 0.8 and loses heat by radiation to surroundings at 300 K.

a. Find the total heat rate into the liquid nitrogen.
b. If the heat of vaporization of the nitrogen is 2 x10^5 J/kg, estimate the boil-off rate (in kg/s).

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 04.07.2019 19:20
Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.
Answers: 3
question
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
You know the right answer?
Liquid nitrogen for cooling the high-purity germanium detectors, maintained at a temperature of 78 K...
Questions
question
Mathematics, 21.10.2021 01:00
question
Mathematics, 21.10.2021 01:00
question
Health, 21.10.2021 01:00
question
Mathematics, 21.10.2021 01:00
Questions on the website: 13722361