subject
Engineering, 26.03.2020 23:55 frisha

A concrete mix design calls for 6.5 sacks of cement, a water/cement ratio of 0.45, and an air content of 2.5%. 1. Complete the mix design usage chart below by filling in the shaded cells. Material Type Description Design Quantity Specific Gravity Volume (ft3 ) Cement Type II lb 3.15 Coarse Aggregate ยพ" x #4 1,190 lb 2.75 Coarse Aggregate โ…œ" x #8 lb 2.72 Fine Aggregate Concrete Sand 1,453 lb 2.66 Water Mixing Water gal 1.00 Air % by Volume 2.5% - Yield lb - 27.00 2. What is the unit weight of this mix in pcf?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
A concrete mix design calls for 6.5 sacks of cement, a water/cement ratio of 0.45, and an air conten...
Questions
question
Chemistry, 04.12.2020 16:50
question
History, 04.12.2020 16:50
question
Mathematics, 04.12.2020 16:50
Questions on the website: 13722362