Engineering, 30.03.2020 21:12 iRaMpAgez
Comparing these two structural elements: Select one or more: a. The bending stress in the upper structural element is negligible compared to the bending stress in the lower structural element. b. The Axial stress in the upper structural element is more than a 100 times the bending stress in the lower structural element. c. The bending stresses in the lower structural element are about 35 times larger than the axial stresses in the upper structural element. d. The bending stress in the upper structural element is severe. e. The difference in the worst stress in each of the two elements is not significant.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs
Answers: 2
You know the right answer?
Comparing these two structural elements: Select one or more: a. The bending stress in the upper stru...
Questions
Advanced Placement (AP), 30.04.2021 06:30
Chemistry, 30.04.2021 06:30
Mathematics, 30.04.2021 06:30
Mathematics, 30.04.2021 06:30
Social Studies, 30.04.2021 06:30
Arts, 30.04.2021 06:30
Chemistry, 30.04.2021 06:30
Mathematics, 30.04.2021 06:30
