Engineering, 02.04.2020 01:14 angelisevega
The head H is connected to the cylinder of a compressor using six 3 16-in. diameter steel bolts. If the clamping force ineach bolt is 800 lb, determine the normal strain in the bolts. If sY=40 ksi and Est=2911032 ksi, what is the strain in each bolt when the nut is unscrewed so that the clamping force is released?
Answers: 1
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:20
Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.
Answers: 1
The head H is connected to the cylinder of a compressor using six 3 16-in. diameter steel bolts. If...
Arts, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
History, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09
Mathematics, 06.05.2020 05:09