Engineering, 02.04.2020 02:55 punkinrichard1oxon2i

Part A What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever beam is fixed at end A (x = 0). A uniform distributed load of 2 kip/ft is applied between A and B (x = 6 ft). A downward 10-kip force is applied at B, and an upward 8-kip force is applied at end C (x = 10 ft). In addition, a clockwise couple moment of 40 kip-ft is exerted at the free end C. What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever beam is fixed at end A (x = 0). A uniform distributed load of 2 kip/ft is applied between A and B (x = 6 ft). A downward 10-kip force is applied at B, and an upward 8-kip force is applied at end C (x = 10 ft). In addition, a clockwise couple moment of 40 kip-ft is exerted at the free end C. −x2 (kip-ft) −x2+14x (kip-ft) −x2+14x+24 (kip-ft) −x2−56 (kip-ft) −x2+24 (kip-ft) −x2+14x−56 (kip-ft)

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

Answers: 2

Answer

You know the right answer?

Part A What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever...

Questions