subject
Engineering, 03.04.2020 01:47 lanaiheart7

A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the coil , and the condensate emerges at at its saturation temperature. A solvent with a heat capacity of 2.30 kJ is fed to the tank at a steady rate of 12.0 kg/min and a temperature of 25°C, and the heated solvent is discharged at the same flow rate. The tank is initially filled with 760 kg of solvent at 25°C, at which point the flows of both steam and solvent are commenced. The rate at which heat is transferred from the steam coil to the solvent is given by the expression where UA (the product of a heat transfer coefficient and the area through which the heat is transferred) equals 11.5 kJ/min·°C. The tank is well stirred, so that the temperature of the contents is spatially uniform and equals the outlet temperature.

Write a differential energy balance on the tank contents.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.
Answers: 1
You know the right answer?
A steam coil is immersed in a stirred heating tank. Saturated steam at 7.50 bar condenses within the...
Questions
question
Mathematics, 04.02.2021 01:00
question
Mathematics, 04.02.2021 01:00
question
Mathematics, 04.02.2021 01:00
Questions on the website: 13722363