Water flows in this bend at a rate of 5 m3 /s, and the pressure at the inlet is 650 kPa. If the head loss in the bend is 10 m, what will be the pressure be at the outlet of the bend? Also estimate the force of the anchor block on the bend in the x direction required to hold the bend in place. Assume = 1.0 at all locations.

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false