subject
Engineering, 04.04.2020 02:23 alexusdyer94

Find the equivalent impedance Zeq seen by the source when Vs = 6 cos (5t) v, C = 0.1 F, R = 1 Ω and L = 0.1 H. (Give angles in degrees and round final answers to two decimal places.) Calculate the voltage across the inductor. (Give angles in degrees and round final answers to two decimal places.) complex impedance The equivalent impedance seen by the source is 1 + j Ω = at an angle of Ω. The voltage across the inductor is at an angle of v.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Find the equivalent impedance Zeq seen by the source when Vs = 6 cos (5t) v, C = 0.1 F, R = 1 Ω and...
Questions
question
Mathematics, 01.06.2021 03:20
Questions on the website: 13722367