Engineering, 04.04.2020 02:28 dontcareanyonemo
For a given material, the reduction in area measured in tension test is 30%. A sheet of this material is subjected to bending. Find the minimum possible radius of the bend if the thickness of the sheet is 1.5 mm. Use the theoritical relation between the minimum bend radius and the reduction in area.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following refers to refers to how well the control system responds to sudden changes in the system. a)-transient regulation b)- distributed regulation c)-constant regulation d)-steady-state regulation
Answers: 1
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200Β°c and outer surface temperature of the insulation to be 15Β°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
For a given material, the reduction in area measured in tension test is 30%. A sheet of this materia...
Mathematics, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Computers and Technology, 09.11.2020 18:40
Social Studies, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Biology, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Computers and Technology, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Mathematics, 09.11.2020 18:40
Computers and Technology, 09.11.2020 18:40