Engineering, 04.04.2020 05:58 endermss6220
10.16 Calculate the nominal values of torsional, axial, thread bearing, and thread shear stresses under starting conditions for the power screws in Problems (a) 10.3, (b) 10.8, (c) 10.9, (d) 10.10, and (e) 10.11. Assume in each case that the length of thread engagement is 1.5 times the outside diameter of the screw.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.
Answers: 2
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
Engineering, 04.07.2019 18:20
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point.the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
You know the right answer?
10.16 Calculate the nominal values of torsional, axial, thread bearing, and thread shear stresses un...
Questions
English, 25.09.2019 12:10
Computers and Technology, 25.09.2019 12:10
Mathematics, 25.09.2019 12:10
English, 25.09.2019 12:10
History, 25.09.2019 12:10
Biology, 25.09.2019 12:10
History, 25.09.2019 12:10
History, 25.09.2019 12:10
