Engineering, 04.04.2020 06:05 ahorseman
Orthogonal machining is done with a depth of cut, width of cut, and cutting velocity of 0.75 mm, 10 mm, and 12 m/min, respectively. If the power consumed by the machine tool is measured to be 4.5 kW, find the specific energy of the material being cut. Assume there are no power losses in the machine tool other than due to cutting.
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
Engineering, 04.07.2019 19:10
Aplate of dimensions 3 m x 3 m is placed 0.37 mm apart from a fixed plate. the plate requires a force of 2n to move at speed of 45 cm/s. evaluate the viscosity of the fluid in between the plates
Answers: 3
You know the right answer?
Orthogonal machining is done with a depth of cut, width of cut, and cutting velocity of 0.75 mm, 10...
Questions
Biology, 03.11.2019 22:31
Mathematics, 03.11.2019 22:31
Mathematics, 03.11.2019 22:31
Mathematics, 03.11.2019 22:31
Chemistry, 03.11.2019 22:31
Spanish, 03.11.2019 22:31
English, 03.11.2019 22:31
Mathematics, 03.11.2019 22:31
Physics, 03.11.2019 22:31
