Engineering, 04.04.2020 17:54 keigleyhannah30
If the number of teeth in the gears 1 and 2 are 60 and 40, the module pitch =3 mm, the pressure angle 200 and the addendum = 0.318 of circular pitch determine the velocity of sliding when the contact is at the tip of the tooth of gear 2 and the gear 2 rotates at 800 rpm
Answers: 1
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 19:20
The process in which the system pressure remain constant is called a)-isobaric b)-isochoric c)-isolated d)-isothermal
Answers: 3
Engineering, 04.07.2019 19:20
List 3 options on how to reduce knocking problens during engine process,
Answers: 2
Engineering, 06.07.2019 03:10
Consider a 1.2 meter high and 2 meter wide glass window whose thickness is 6 mm and thermal conductivity is 0.78 w/m °c. the room temperature is maintained at 24 °c, while the outdoor temperature is -5 °c. the convective heat transfer coefficients on the inner and outer surfaces of the window are 10 w/m2 °c and 25 w/m2 °c respectively. (a) draw the thermal resistance network, etermine the steady rate of heat transfer t e glass window (c) determine the temperature of the inner surface of the window
Answers: 3
If the number of teeth in the gears 1 and 2 are 60 and 40, the module pitch =3 mm, the pressure angl...
Advanced Placement (AP), 14.04.2020 21:02
Social Studies, 14.04.2020 21:02