Engineering, 06.04.2020 22:17 haily13
Which of the following processes will tend to strengthen a typical pure metal ? Assume that we are comparing the stress-strain response of the original metal to the stress-strain responses of the room-temperature altered metals after these separate processes have been conducted. Select all that apply. Cold-working the pure metal. Hot-working the pure metal. Adding solute to form a solid solution. Precipitation of a secondary phase Annealing the pure metal. Melting then casting the pure metalIncreasing the dislocation density (dislocations count per unit volume) Decreasing the grain density (grain count per unit volume Increasing the average grain size
Answers: 3
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Which of the following processes will tend to strengthen a typical pure metal ? Assume that we are c...
English, 28.08.2019 23:00
Computers and Technology, 28.08.2019 23:00
Social Studies, 28.08.2019 23:00
Computers and Technology, 28.08.2019 23:00
Social Studies, 28.08.2019 23:00
Mathematics, 28.08.2019 23:00