Engineering, 07.04.2020 17:22 idklol81

Three phase, 12 pole induction motor is excited by 60 Hz three phase source. At rated load and speed, the induction motor runs at 860 rpm and absorb 90kW power from the three phase AC input. The kinetic energy of all revolving parts is 100kJ at rated load and speed. 1. Calculate the slip of the motor at rated speed. 2. If the voltage induced at rotor bar is 10V when the rotor is locked, what is the voltage induced at rotor bar when the motor is at rated speed? 3. What is the I^2R loss at rated load and speed? 4. Plugging is applied to stop the induction motor and then reverse the rotation to 860 rpm, how much power dissipated in the rotor circuit during this process?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

Answer

You know the right answer?

Three phase, 12 pole induction motor is excited by 60 Hz three phase source. At rated load and speed...

Questions