Assign rateMPH with the corresponding rate in miles per hour given a user defined rateKPH, which is a rate in kilometers per hour. Use the local function KilometersToMiles. Your Solution g function distanceMiles = CalculateDistance(timeHours, rateKPH) % timeHours: Time in hours A % rateKPH: Rate in kilometers rateMPH = rateKPH; % Call KilometersToMiles function (below) to assign % rateMPH with the corresponding speed in miles per hour distanceMiles = rateMPH * timeHours; end % Do not modify the function below function milesValue = KilometersToMiles(KilometersValue) milesValue = KilometersValue * 0.6213712; 15 end Code to call your function when you click Run Calculate distance(1, 40)

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?