subject
Engineering, 07.04.2020 20:15 bpo2205748

Helical compression spring is wound from 3.5 mm dia. A228 music wire (set removed) and has an OD of 22 mm. The spring has plain-ground ends. a) In order to achieve a spring rate of 25 N/mm, specify the total number of coils in the spring

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 06.07.2019 03:10
List and describe in sequence the operation process steps for boxf machine?
Answers: 1
question
Engineering, 06.07.2019 03:20
An air-conditioning system consists of a heating section and an evaporative cooler. air enters the heating section at 10°c and 70 percent relative humidity at a rate of 30m^3/min, and it leaves the evaporative cooler at 20°c and 60 percent relatively humidity. if the air conditioning system operates at a total pressure of 98 kpa, determine (a) the temperature and relative humidity of the air when it leaves the heating section, (b) the rate of heat transfer in the heating section, and (c) the rate of water added to air in the evaporative cooler
Answers: 2
You know the right answer?
Helical compression spring is wound from 3.5 mm dia. A228 music wire (set removed) and has an OD of...
Questions
question
History, 24.05.2020 01:01
question
Mathematics, 24.05.2020 01:01
question
Mathematics, 24.05.2020 01:01
Questions on the website: 13722361