Engineering, 08.04.2020 03:16 ahorseman

To reduce the drag coefficient and thus improve the fuel efficiency of cars, the design of side rearview mirrors has changed dramatically in recent decades from asimple circular plate to a streamlined shape. Determine the amount of fuel and moneysaved per year as a result of replacing a 15-cm-diameter flat mirror by one with ahemispherical back. Assume the car is driven 25,000 km a year at an average speedof 95 km/hr. Take the density and price of gasoline to be 0.75 kg/L and $0.90/L, respectively; the heating value of gasoline to be 44,000 kJ/kg and the overall efficiencyof the engine to be 30 percent.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

Answer

You know the right answer?

To reduce the drag coefficient and thus improve the fuel efficiency of cars, the design of side rear...

Questions