subject
Engineering, 09.04.2020 12:50 keilajohnson810

Consider the voltage-regulator circuit shown in Figure 2. The ac ripple voltage is 1 V
peak to peak. The dc (average) load voltage is 5 V. What is the Q-point current in the
Zener diode? What is the maximum dynamic resistance allowed for the Zener diode if the
output ripple is to be less than 10 mV peak to peak?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
Consider the voltage-regulator circuit shown in Figure 2. The ac ripple voltage is 1 V
peak to...
Questions
question
Mathematics, 22.12.2020 22:10
question
History, 22.12.2020 22:10
question
English, 22.12.2020 22:10
question
Mathematics, 22.12.2020 22:10
question
Mathematics, 22.12.2020 22:10
Questions on the website: 13722362