subject
Engineering, 10.04.2020 17:16 lilloser

A wastewater treatment plant discharges 1 m3/s of effluent with an ultimate BOD of 40 mg/L into a stream flowing at 10 m3/s. Just upstream of the discharge point, the stream has an ultimate BOD of 3 mg/L. The deoxygenation constant (kd) is estimated to be 0.22 1/d. (a) Assuming complete and instantaneous mixing, find the ultimate BOD of the mixture of the waste and the river just downstream of the outfall. (b) Assuming a constant cross-sectional area for the stream equal to 55 m2, what ultimate BOD would you expect to find at a point 10,000 m downstream?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:20
What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.
Answers: 3
question
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
You know the right answer?
A wastewater treatment plant discharges 1 m3/s of effluent with an ultimate BOD of 40 mg/L into a st...
Questions
question
Mathematics, 15.07.2020 01:01
question
Chemistry, 15.07.2020 01:01
Questions on the website: 13722359