Forced air at 25C and 10m/s is used to cool chips on a circuit board. Consider a chip, 4mm x 4mm, located 120mm from the leading edge of the board. An empirical correlation has been established for the local Nusselt number:

Nu_x = 0.04 * Re_x^0.85 * Pr^(1/3)

Estimate the surface temperature of the chip if it is dissipating 30mW.

(Thermophysical properties of air at 25C are needed to solve this problem. Please state your reference source for this information.)

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information