Engineering, 11.04.2020 03:02 jarvinmcgillp3dhni
A rigid tank with a volume of 4 m^3 contains argon at 500 kPa and 30 deg C. It is connected to a piston cylinder (initially empty) with a line and a closed valve. The pressure in the cylinder should be 300 kPa to float the piston. Now the valvle is slowly opened and heat is transferred so the argon reaches a final state of 30 deg C with the valve open. The heat transfer takes place from a 60 deg C space through a conduction layer 1 cm thick with a conductivity k = 0.1 W/mK and a surface area of 1.5 m^2.
a. Find the final volume of the argon and the total work for the process.
b. Find the total heat transfer needed.
c. How long will the process take?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 18:20
Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency
Answers: 1
Engineering, 04.07.2019 19:10
Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view
Answers: 2
You know the right answer?
A rigid tank with a volume of 4 m^3 contains argon at 500 kPa and 30 deg C. It is connected to a pis...
Questions
Physics, 24.03.2020 03:42
Physics, 24.03.2020 03:43
Mathematics, 24.03.2020 03:43
Spanish, 24.03.2020 03:43
Mathematics, 24.03.2020 03:43
Mathematics, 24.03.2020 03:43
