subject
Engineering, 11.04.2020 03:27 webbjalia04

A park in a valley was contaminated with the chemicals from an overturned truck. See below:

Contaminants of interest: a. Bromomethane b. Pentachlorphenol c. Acetic Acid

Site Characteristics:

Air volume: 10^9 m3

Soil volume: 1000 m3

Lake volume: 5.7 x 10^6 m3

Fish volume: 2.5 m3 (fish density: 1.5 g/cm3 )

Assume the park soil is a saturated silt clay loam soil with an organic fraction of 1.3%, which is saturated with a 0.479 porosity. The hydraulic gradient in the silt clay loam is 0.022 and averages a hydraulic conductivity of 0.05 cm/h and a soil density of 1.52 g/cm3 .

There was initially 25 kg of each chemical spilled. If the spill happened near enough to the lake that the runoff potentially carried it there, how would each of these contaminants partition into the lake, soil, air, and the rainbow trout in the lake?

Note that the valley is so enclosed that the air in the atmosphere can be assumed to remain stagnant in the park. The rainbow trout bioconcentration factor (BCF) can be estimated from the following equation: o = 0.76oKo − 0.23.

For all the three chemicals, the empirical equation by Kenaga and Goring (1980) based on 45 organics is used: log Koc = 0.544 logKo + 1.377.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
You know the right answer?
A park in a valley was contaminated with the chemicals from an overturned truck. See below:
Questions
question
Mathematics, 01.10.2019 14:30
question
Computers and Technology, 01.10.2019 14:50
question
Mathematics, 01.10.2019 14:50
question
Mathematics, 01.10.2019 14:50
question
English, 01.10.2019 14:50
Questions on the website: 13722367