Engineering, 11.04.2020 03:45 raulriquelmef6p0947w
A piston-cylinder device contains an ideal gas mixture of 3 kmol of He gas and 7 kmol of Ar gas (both gases are monatomic) at 27°C and 200 kPa. Now the gas expands at constant pressure until its volume doubles. The amount of heat transfer to the gas mixture is, in MJ (round to nearest integer; for example if the answer is 53.7MJ, write 54; if the answer is 52.1MJ write 52; do not include the units in your answer)
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.
Answers: 2
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
You know the right answer?
A piston-cylinder device contains an ideal gas mixture of 3 kmol of He gas and 7 kmol of Ar gas (bot...
Questions
Chemistry, 23.05.2020 03:03
