subject
Engineering, 14.04.2020 17:51 jetblackcap

Is it possible to have a copper-silver alloy of composition 20 wt% Ag- 80% Cu that, at equilibrium, consists of LaTeX: \alphaα and liquid phases having mass fractions WLaTeX: \alphaα = 0.80 and WL= 0.20? If so, what will be the approximate temperature of the alloy? If such an alloy is not possible, explain why.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
question
Engineering, 04.07.2019 19:10
The proportional limit is always greater than the yield strength for a material. a)-trune b)- false
Answers: 3
question
Engineering, 04.07.2019 19:20
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
You know the right answer?
Is it possible to have a copper-silver alloy of composition 20 wt% Ag- 80% Cu that, at equilibrium,...
Questions
question
Mathematics, 30.09.2019 21:00
question
Mathematics, 30.09.2019 21:00
question
Mathematics, 30.09.2019 21:00
question
Computers and Technology, 30.09.2019 21:00
question
Mathematics, 30.09.2019 21:00
question
Mathematics, 30.09.2019 21:00
Questions on the website: 13722362