Engineering, 14.04.2020 20:31 marissasusievalles
Suppose there are 76 packets entering a queue at the same time. Each packet is of size 5 MiB. The link transmission rate is 2.1 Gbps. What is the queueing delay of packet number 48 ?(in milliseconds, rounded to one decimal place, e. g. 0.01234 seconds would be entered as "12.3")
Answers: 2
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
Suppose there are 76 packets entering a queue at the same time. Each packet is of size 5 MiB. The li...
Mathematics, 03.06.2021 18:40
Mathematics, 03.06.2021 18:40
Computers and Technology, 03.06.2021 18:40
Mathematics, 03.06.2021 18:40
History, 03.06.2021 18:40
Mathematics, 03.06.2021 18:40
Mathematics, 03.06.2021 18:40
Mathematics, 03.06.2021 18:40