Engineering, 15.04.2020 01:55 heyitshenna96

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an output resistance of The signal source has an internal voltage of 5 V rms and an internal resistance of The load resistance is If the signal source is connected to the amplifier input terminals and the load is connected to the output terminals, find the voltage across the load and the power delivered to the load. Next, consider connecting the load directly across the signal source without the amplifier, and again find the load voltage and power. Compare the results. What do you conclude about the usefulness of a unity-gain amplifier in delivering signal power to a load

Answers: 3

Show answers

Answers

Answer from: juarezanthony258

complete question

A certain amplifier has an open-circuit voltage gain of unity, an input resistance of 1 \mathrm{M} \Omega1MΩ and an output resistance of 100 \Omega100Ω The signal source has an internal voltage of 5 V rms and an internal resistance of 100 \mathrm{k} \Omega.100kΩ. The load resistance is 50 \Omega.50Ω. If the signal source is connected to the amplifier input terminals and the load is connected to the output terminals, find the voltage across the load and the power delivered to the load. Next, consider connecting the load directly across the signal source without the amplifier, and again find the load voltage and power. Compare the results. What do you conclude about the usefulness of a unity-gain amplifier in delivering signal power to a load?

3.03 V 0.184 W

2.499 mV 125*10^-9 W

Explanation:

First, apply voltage-divider principle to the input circuit: 1

$V_{i}= (R_i/R_i+R_s) *V_s = 10^6/10^6+(0.1*10^6)\\$ *5

= 4.545 V

The voltage produced by the voltage-controlled source is:

A_voc*V_i = 4.545 V

We can find voltage across the load, again by using voltage-divider principle:

V_o = A_voc*V_i*(R_o/R_l+R_o)

= 4.545*(100/100+50)

= 3.03 V

Now we can determine delivered power:

P_L = V_o^2/R_L

= 0.184 W

Apply voltage-divider principle to the circuit:

V_o = (R_o/R_o+R_s)*V_s

= 50/50+100*10^3*5

= 2.499 mV

Now we can determine delivered power:

P_l = V_o^2/R_l

= 125*10^-9 W

Delivered power to the load is significantly higher in case when we used amplifier, so a unity gain amplifier can be useful in situation when we want to deliver more power to the load. It is the same case with the voltage, no matter that we used amplifier with voltage open-circuit gain of unity.

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an

Answer from: Quest

b. check your rearview mirror

explanation:

Answer from: Quest

answer: 500 wph.

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

Answer

Engineering, 03.07.2019 14:10

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

Answer

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Fluids at rest possess no flow energy. a)- true b)- false

Answers: 3

Answer

You know the right answer?

P10.12. A certain amplifier has an open-circuit voltage gain of unity, an input resistance of and an...