Engineering, 15.04.2020 00:38 jlink6836
Starting with the column in Problem 1, perform enough additional calculations to determine the effects of increasing fc from 5000 to 8000 psi on column capacity at both high and low axial loads. Assuming that a compressive strength of 8000 psi is appropriate for the lower stories of a high-rise structure, would you recommend using concrete with fc = 8000 psi for the columns supporting all stories within the building? Use your analysis to support your answer.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Starting with the column in Problem 1, perform enough additional calculations to determine the effec...
Mathematics, 13.04.2021 22:50
Advanced Placement (AP), 13.04.2021 22:50
Biology, 13.04.2021 22:50
English, 13.04.2021 22:50
Mathematics, 13.04.2021 22:50
Mathematics, 13.04.2021 22:50
Chemistry, 13.04.2021 22:50
Mathematics, 13.04.2021 22:50