Design a 2-bit analog to digital converter. The range is 0 to 3.2V.
For input voltages betwee...
Engineering, 15.04.2020 02:47 alleshia2007
Design a 2-bit analog to digital converter. The range is 0 to 3.2V.
For input voltages between 0 and 0.8V make the output 00
For inputs between 0.8 and 1.6V make the output 01
For inputs between 1.6 and 2.4V make the output 10, and for inputs between 2.4 and 3.2V make the output 11.
Use rail-to-rail op amps powered at 3.3V. Specify resistor values and capacitor values.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
You know the right answer?
Questions
Mathematics, 07.03.2020 03:45
Mathematics, 07.03.2020 03:45
Social Studies, 07.03.2020 03:45
